The Mini Temperature Calibration Bath quickly cools to 32°F and heats to 130°F. It does so through a solid-state peltier heat pump. With one button for Hot and one for Cold, the operation of the Mini Temperature Calibration Bath couldn't be easier. The bath is able to maintain 32°F for over four hours when on Cold. For a Hot reading, it will continue heating until it reaches approximately 130°F and the bath will hold that temperature to prevent over heating. The Mini Temperature Calibration Bath also comes with an AC adaptor for convenient calibrations from your car on site. The thermometers included in the photo are sold separately.
P54-100-312 Digital Caliper 12" Length with 3.5" Jaw
12" Digital Caliper has a 3.5" jaw depth to easily get more than half way around a 6" diameter cylinder. The caliper reads in inches and mm with a resolution of 0.0005"/0.01mm. Comes with a wooden case and extra battery. The caliper can be NIST Traceable when requested.
C-260 Planeness/Feeler Gauge Set
Planeness/Feeler Gauge Set is used to determine the planeness (flatness) of platens, capping fixtures. The set consists of 6 in. long precision ground parallel bar, feeler gauge set, 0.001 in feeler gauge, 1/8" dia. rod and plastic case. The set can be made NIST Traceable upon request.
HM-162 Pi Tape
Diameter tapes provide a fast, reliable method for measuring the diameter of concrete, soil and asphalt cores and cylinders. One reading provides round and out-of-round diameters within an accuracy of .001" (.03mm) by means of special graduations and vernier scale. All tapes are made from a stainless alloy and are precision engraved to ensure accuracy. Tape has diameter range of 2" to 12". Includes certificate of calibration. Tapes are calibrated and include a NIST-traceable certification. Meets ASTM D2166, D2850, D4767.
H-2813 Magnifying Comparator
The magnifying Comparator is ideal for use in examining sieve mesh for size verification, as well as general inspection for damage. The instrument is supplied complete with four interchangeable scales: #121— .5 x .005" Ruler line scale #122— 15 x .1mm Ruler line scale #172— .5 x 0.1" Parallel line scale #173— 1/2 x 1/64" Parallel line scale
H-2939 Core Length Measuring Device
For determining concrete core lengths. Device accommodates either 4" or 6" diameter specimens up to 24" long. Allows measurements to be taken at the center of the specimen’s upper end, as well as eight equidistant points along the circumference. Measuring rod has gradations 0.10" (2.5mm) apart. Meets ASTM C174.
