Measures entrained air in normal weight fresh mixed concrete. Easy-to-use & easy-to-read gauge with calibration adjustments. Brass pump builds test pressure faster using fewer strokes. Complete with plastic carrying case, meter, syringe, tamping rod, strike-off bar, rubber mallet, calibration vessel, inside and outside calibration rules & instructions.
Air Meter is also sold as a METER ONLY (ACM-6A)
GAM-0200 Lightweight Air Meter Kit-Roller Meter Type (Aluminum)
The Lightweight air meter (Roller Meter) simply and accurately measures the air content of fresh mixed concrete utilizing lightweight aggregates and all other types of aggregate. The Lightweight Meter is constructed from super-tough aircraft grade cast aluminum and is black anodized to resist corrosion from concrete mixtures. Supplied with stainless steel fast acting clamps, tamping rod, syringe, baffle funnel assembly, straightedge, spanner wrench, measuring cup and heavy duty plastic carrying case. Made in the USA. Meets ASTM C-173 and AASHTO T-196.
ACM-4K Lightweight Air Meter Kit-Roller Meter Type (Plastic)
The volumetair easily measures entrained air in any type of concrete.
♦ Ultra lightweight: Weighs 1/3 of the brass unit weighs 1/2 of "lightweight" aluminum unit ♦ Kit includes meter, funnel, syringe, tamper, calibrated cup, mallet, strike-off bar & carrying case ♦ Meets ASTM C173
A-1100 Chase Air Indicator Kit
The inexpensive Chace Air Indicator Kit is recommended for fast estimating of air content of fresh concrete. Method is ideal for rapid field judgments or for deciding when to do more thorough air meter tests. Air Indicator Only (A-1101) Glass Tube Only (A-102)
Cylinder Molds Plastic
Test Cylinder Molds are designed in accordance with ASTM Standard Specifications for Molds for Forming Concrete Test Cylinders Vertically Sizes Available: 6”x12”20/case (TC6PG) 6"x12" 36/case (PAR61236) 4”x8”36/case w/ attached lids (PAR4836) 4"x8" 96/case w/ attached lids (PAR4896) 3”x6”80/case w/ attached lids (PAR3680) 2”x4”84/case w/ attached lids (PAR2484)
FG-60KB Digital Scale 150 lb x 0.01 lb
A rugged & durable scale for use in the lab or field.
♦ Capacity: 150 lbs.(60kg) ♦ Readability: 0.01 lbs. (0.005kg) ♦ Weighing Modes: lbs & kg ♦ Platform Size: 11.8" x 15" ♦ Power Supply: AC adapter (included) or 4-C Batteries ♦ RS-232 Interface Optional ♦ Optional Carrying Case also available
CPWplus 75 Economy Digital Scale w/ Case 165lb x 0.05lb
A good economy scale for lab or field use.
Capacity: 165lbs Readability: 0.05lb Weighing modes: lbs & kg Platform size: 11.8" x 11.8" Power Supply: AC adapter (included) or 6 AA batteries
Round Mouth Scoops
Sizes Available: 38oz (ACM-34M) Preferred for slump, air meter & 6" x 12" molds 24oz (ACM-34S) Preferred for 4" x 8" molds and smaller 58oz (ACM-34L) 12oz (ACM-34SS) Other sizes also available. Please inquire.
RM-1 Rubber Mallet 1lb RM-2 Rubber Mallet 2lb
The non-marring, black rubber head of this 1 lb mallet is securely attached to a hardwood handle.
ACM-32 Slump Cone-Metal
The Slump Cone is spun from heavy gauge steel and is seamless to provide a stronger, more durable product that is easy to clean. All parts are plated for rust resistance. The cone has an 8" open base and a 4" top. Overall height is 12".
PSC Slump Cone-Plastic
This inexpensive, rugged Plastic Slump Cone is dimensionally identical to our standard metal cone. It will not rust or dent and can be cleaned in an acid bath if necessary.
SCSET Slump Cone Test Set (base, cone, rod, scoop)
Portable slump test set includes all tools necessary to conduct a slump test on a sample of freshly mixed concrete. Includes portable slump test base with cone hold-down clamps, slump cone, tamping rod and scoop. Meets ASTM C-143, AASHTO T-119.
SCB Slump Cone Base-Aluminum
Slump Cone Base Plate is made from cast aluminum. Base clamps rotate over foot lugs to secure the Slump Cone during filling. After filling of the Slump Cone, the Base can be released without disturbance of the sample.After lifting the Slump Cone, the handle rotates vertically over the sample to facilitate measurement of the resulting concrete slump. The base can be used to consolidate entire slump testing set into one, easy to carry unit.
Tamping Rods
Round, straight steel rod for use with concrete cylinder molds, slump cones, and unit weight tests. Both ends are rounded to a hemispherical tip. Rod is plated for rust resistance.
Sizes available: 5/8” X 24” (ACM-33A) 3/8” x 12” (ACM-39)
PD-125 Concrete Dial FaceThermometer
25°-125°F thermometer with 1" dia. dial face & 5" stem. Readable to 1oF with calibration nut. Comes with plastic sleeve. Quantity discounts on orders of 12+!
ST10 Pocket Digital Thermometer
Range: -50 to 392°F (-45 to 200°C) Resolution: 0.1°C or °F Probe:5" x 1/8" dia. Stainless Steel Probe Battery:1 LR44 1.5V (Free Spare) Units: Switchable °C/°F
Quantity discounts on orders of 6+
RT600B Min/Max Thermometer-Digital
Water Proof design. Min/Max function records high and low temperatures. Range: -58 to 392°F (-50 to 200°C) Resolution: 0.1°C or °F Includes Pocket Clip Quantity Discounts for 6+
MA-162 Min/Max Thermometer Mercury Push Button
Dual-scale thermometer has U-shaped capillary mounted in plastic 8 x 2-5/8 x 1" with guard and mounting tab. Ranges:-40°F to 120°F in 2°F div. and -40°C to 50°C in 1°C div. Thermometer indicates present, highest and lowest temperature since last indices setting. Indices are easily reset after each reading.
Unit Weight Buckets-Steel
For determining unit weight of aggregates and fresh concrete. Non ASTM. Heavy-gauge seam-welded watertight steel, with bail handle.
Unit weight buckets also available meeting ASTM standards (must not have a seam up the side).
Plastic Strike-Off Plates (Meet ASTM)
SOPP12 12" x 12" x 1/2" SOPP14 14" x 14" x 1/2"
Durable Plastic Strike-Off Plates meets ASTM standards and are more economical and lighter weight than metal. Use plate that is 2" larger plate than the diameter of the unit weight measure. Most purchase SOPP14 which will work on up to a 1/2 ft3 unit weight bucket.
CURE Field Curing Box w/o Heater
This Portable Field Curing Box is a zipper-sealed polymer and vinyl chest with 1/2 inch of insulating foam and a rigid floor plate. It is designed to hold eight 6 x 12 inch concrete cylinders in an upright position.
Thermol Field Curing Box-Heats Only
Used to maintain temperature and humidity of concrete cylinder specimens. Plastic construction with 14 gauge steel bottom rack, bottom drain valve, and lockable lid.Features a digital thermometer, heat indicator lights, temperature set buttons and a capacity of 22 standard 6" x 12".
Thermoll Field Curing Box-Heats & Cools
Unit both heats and cools. Used to maintain temperature and humidity of concrete cylinder specimens. Plastic construction with 14 gauge steel bottom rack, bottom drain valve, and lockable lid. A preset temperature control is set at 73°F. Features a digital thermometer, heat/cool indicator lights, temperature set buttons and a capacity of 22 standard 6" x 12".
ACM-SCC-J J-Ring Test Set for SCC
The J-Ring Test Set is used to determine the passing ability of self-consolidating concrete (SCC) by the J-Ring Method. Limited to concrete with nominal maximum size of aggregate of 1". The Set includes the steel J-Ring, slump cone and metal 36" x 36" base plate.Meets the new ASTM specification C 1621 and C 1621M-06.
SCC-Base SCC Base Only 36" x 36"
High Density Polyethylene Base is 36" x 36". The base has concentric circles scribed at 4", 20" & 30".
HC-3666 SCC Static Segregation Column Mold
The Static Segregation Column Mold is used to determine the potential static segregation of self-consolidating concrete. An easy-to-use clamping and collection system allows the segregation test to be conducted by a single operator.
Steel Cylinder Molds
Reusable steel cylinder molds for concrete test specimens for compression testing. Manufactured from 1/4" thick seamless pipe and split longitudinally. Heat treated so the body will spring open when unclamped to permit specimen removal. Base plate, wing nut clamps and carrying handle included.
Sizes Available: 6”x12” (H-2942)
4”x8” (H-2934)
ACM-FC-1K Grout Flow Cone (Plastic) Assembly
The flow cone is used for measuring the fluidity of grout mixes in the field or laboratory.
Grout Flow Cone Only-Aluminum 1/2" or 3/4"
Cast-aluminum flow cone is used in the laboratory and field for determining flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a standardized flow cone. Specify 1/2" or 3/4" orifice. Includes adjustable point gauge assembly. Overall dimensions: 8" dia. x 12"H. Meets ASTM C939.
Grout Flow Cone, 1/2" (H-2834) Grout Flow Cone, 3/4" (H-2835) Stand for Flow Cone (H-2833)
H-3655 Ball Penetration Apparatus (Kelly Ball)
Ball Penetration Apparatus (Kelly Ball) determines depth of penetration of metal weight into plastic concrete. Apparatus consists of 30 lb. cylinder with hemispherically shaped bottom and handle. Stirrup or frame guides handle and acts as reference for measuring depth of penetration. Handle is graduated in 1/4" increments on one side and half-centimeter increments on the other side. Concrete may be tested as placed in the forms prior to any manipulation or in a suitable container. Meets ASTM C360; AASHTO T183; California Test Method CTM533.
H-3643 K Slump Tester
For in-place measurements of forms and test molds. Tester indicates correlation to the slump test. Probe determines the workability of concrete and the degree of compaction after being placed in the forms. Includes correlation chart and instructions.
Vebe Consistometer
H-3648 (ASTM C1170) H-3649 (ASTM C1176)
Model H-3648 Vebe Consistometer conforms to ASTM C1170 for determining the consistency and density of roller-compacted concrete. The unit is comprised of a vibrating table, swing arm with guide sleeve for the 50 lb surcharge weight and a test mold.
Model H-3649 Vebe Consistometer conforms to ASTM C1176 for determining the consistency and density of roller-compacted concrete. The H-3649 is comprised of a vibrating table, swing arm with guide sleeve for the 20 lb surcharge weight and a test mold.
H-4132 Concrete Pocket Penetrometer
Lightweight, spring-reaction type concrete penetrometer for field and lab evaluation of the initial set of concrete mortar, based on ASTM C403. Penetration plunger has a 1/20 sq. in. tip area. Plunger is steadily pushed into the mortar to a 1 in. depth, as indicated on the shaft, at periodic time intervals. Penetrometer’s calibrated range is 0-700psi. Resistance in psi is indicated on the scale. The term “initial set” is the semi-hardened, partially hydrated condition of the concrete beyond which it can no longer be worked. The point of initial set is reached when the penetration value is 500psi. Meets ASTM C780.
H-3639.20 Long Handle Cleaning Brush
Long-handle, brush designed for use in concrete, great for clean up and stands up to acid wash. Plastic handle and polypropylene bristles, bristle length: 2" x 3" x 4", Overall: 20".
E21101 ACI Field Testing Grade I Training CD
This single user CD includes the following ASTM based training and educational modules.
C31 - Molding Strength Specimens
C138 - Density, Yield, Gravimetric Air Content
C143 - Slump
C172 - Sampling
C173 - Air Content by the Volumetric Method
C231 - Air Content by the Pressure Method
C1064 - Temperature
C29 - Density of Aggregate
C94 - Ready Mixed Concrete
Concrete Basics
Concrete Materials
E21102 ACI Concrete Strength Testing Training CD
This single user CD includes the following ASTM based training and educational modules.
