Reduces test samples too large to handle conveniently. Divides samples so each half is representative of original total sample. Handles any material from sand sizes up to 4". Heavy welded steel construction loading hopper, lever actuated clamshell hopper, and two material pans that slide under each half of splitter chute. One pan can be replaced by a bag loading chute to return one half of the charge to a sample bag. The single-splitter chute has aluminum or plated steel bars with a locating rod passed through their lower ends to provide wide flexibility in sizes of chute openings. Two materials pans are included.
SP-2 Porta-Splitter Up to 2" Material
Porta-Splitter is ideal for dividing small bulk samples of most fine gravel & sand sizes. With a 0.55 cu.ft. lever-release hopper and the capacity for up to 36 dividing chutes. This splitter will provide accurate representative samples foe a wide range or materials up to 2" in size.
Fixed Chute Riffle Splitters
Riffle-type sample splitters divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. Material poured into the hopper is divided into two equal portions by a series of chutes that discharge the material alternately in opposite directions into separate pans. Splitters are stainless steel construction, and pans are stainless or cold-rolled steel, see chart for type and quantity of pans included. All splitters include pans, scoop and cleaning brush.
Heavy-duty quartering canvas for use in selecting and quartering soils and aggregates. All edges are seamed and stitched. Meets ASTM C109, C702; AASHTO T248.
MA-837 Two Burner Hot Plate
Easy to clean solid discs. Independent temperature controls. Dual indicator lights. Powerful 1550 watts.
H-3460 Chapman Specific Gravity Flask
Flask has two bulbs for determining approximate percentage of voids and surface moisture in fine aggregates. Graduated to 200ml between bulbs and from 375ml up to 450ml (in 1ml divisions) above second bulb. Meets ASTM C70; AASHTO T142.
H-3400 Le Chantelier Specific Gravity Flask
For determining density of powdered materials—limes, slag and hydraulic cement. Capacity: 250ml. Neck is graduated from 0 to 1ml and from 18 to 24ml. Flask is accurate to .05ml. Meets ASTM C188; AASHTO T133.
H-4967 Speedy Moisture Kit-20g Capacity
Ideal for determining the moisture in fine aggregates and granular materials - soils, sand, clay, and powders – within seconds and in field conditions. No calculations are necessary, the gauge provides direct reading of the chemical reaction between the reagent (calcium carbide) and water to produce acetelyne gas pressure.
The kit comes in a heavy duty plastic case which is water tight, air tight and dust proof, features reinforced ribbing, a continuous Dri-Loc seal and a pressure release valve and will protect your Moisture Tester from weather and rough handling. The kit contains vessel with gauge, digital scale, scoop, cleaning brush, cleaning cloth and two steel pulverizing balls.
MAA-40 Speedy Reagent-24 one pint cans
T-90 Trident Moisture Meter
The Trident Moisture Meter utilizes the latest microwave and microprocessor technology to measure moisture content in various fine and coarse-grained materials. The prongs of the probe are inserted into the material to be tested and the percentage of moisture content is instantaneously shown on the easy to read display. The Trident comes calibrated for both sand and aggregate, and can be programmed by the user for up to ten different materials. The Trident can store more than 150 readings – complete with time and date for future reference.
